At Fred Millturn parts we can provide these replacement linkages – simply complete the order form here.
There are 3 throttle linkage rods. The front two are identical, the rear one is different.
The front two throttle linkage rods are 18-19cm long and have a right-hand thread on the bottom. The upper swivel posts are held in place by brazed flanges. The lower swivel posts are threaded.
The rear throttle linkage rod is 16-17cm long and is threaded at the bottom and has a bracket brazed to the top which connects directly to the throttle shaft with a pin. There is no upper swivel post. The lower swivel post has no internal threads and is secured using half nuts. The journal linking the rear swivel post to the lower actuating arm is smaller than on the front two.
If you need replacement parts, you can order them using the form here.